SCALLOPING             WWW.ROCKSOLIDGUITARS.COM


Scalloping can be done on the whole neck or from the twelve fret up.
Notice some back contours cannot be used on a scalloped neck.
Also no custom inlay on a scalloped neck.

 

FRET WIRE SIZE       

CHOOSING A FRET SIZE:

Fret size has a great deal to do with the action of your guitar. Low frets put your fingertips right on the fingerboard with little room to squeeze the strings out of tune or to get under them from bending. Tall frets are the opposite. The width of the fret determines the amount of ware that can be expected before leveling and re-crowning is necessary. Wider frets wear longer. Narrow frets ware faster. Choosing a fret size is best done by experience. Do you like the feel of your present neck? Would you like more height or less height? Shop and compare to see which is best for you.
 

STANDARD NICKEL/SILVER FRET WIRE

ITEM NUMBER       WIDTH X HEIGHT      DESCRIPTION

6100                           .112" x .055"                  Huge! This is big stuff for the feel of a scalloped neck

6105                           .096" x .047"                  Narrow & tall. A very popular choice.

6130                           .106" x .036"                  Often called a medium jumbo. This is the size found on many Gibson necks.

6230                           .080" x .043"                  This is the smallest fret wire. Used in older Fender necks.

6150                           .103" x .046"                  A true jumbo. It is about the same width as the 6130 but a bit taller.

STAINLESS STEEL FRET WIRE

If you want an extra slick feel along with super smooth bending and playability, this is the stuff! Stainless stell is harder and it's life expectancy is much longer than our standard fret wire,

ITEM NUMBER        WIDTH X HEIGHT      DESCRIPTION

SS6105                       .102" x .049"                   A true jumbo. It is the same width as the 6130 but a bit taller.

SS6230                       .080" x .043"                   Small vintage Fender size.

SS6115                       .107" x .052"                   A true jumbo wire

GOLD FRET WIRE

Gold fret wire is tough copper alloy without nickel and the color is similar to 12k gold in appearence. This is not the same brass color as the Warwick wire, This is not just a "plating". It is solid throughout. Very classy looking wire.Gold alloy wire works and wears about the same as the standard Nickel/Silver Fretwire.

ITEM NUMBER        WIDTH X HEIGHT       DESCRIPTION

61GD                        .090" x .055"                 Narrow and quite tall

BRIDGES  

We use original Floyd Rose Bridges, Schaller Fixed Bridges, and Trilogy Bridges. Call us if you have a different bridge you would like us to use. You can e-mail us at curtburton@peoplepc.com

TUNERS

You will have to decide which tuners you like. The following are the ones offered in gold chrome and black finish.

      
SCHALLER MINI TUNERS               GOTOH SG38                                PLANET WAVES   


CLICK HERE FOR WOOD SAMPLES

CONTINUE PICKING THE FEATURES OF YOUR CUSTOM GUITAR

HOME PAGE   ORDER FORM     ABOUT ROCK SOLID GUITARS

Have more questions? Call us 218-298-1250